top of page

Best Leather Hides for Sports Goods: A Spec Guide for Jalandhar and Meerut Makers (2026)

17 hours ago
6 min read

The best leather hides for sports goods depend on the product. Cricket-ball covers use alum-tanned bovine leather. Boxing gloves use full-grain cowhide, buffalo or goatskin. Kit bags, straps and belts use full-grain or vegetable-tanned cow or buffalo. Cite the matching BIS leather specification on the purchase order and test thickness and rub fastness before bulk.

Updated November 2026. This guide is for sports goods factories in Jalandhar, Meerut and elsewhere in India that buy finished leather by the hide. It covers which animal and finish to specify, the BIS standards that exist for sports leather, the tests to ask for and the GST you will pay.

Key Takeaways

  • BIS lists separate leather specifications for boxing gloves (IS 5597:1970), hockey balls (IS 5609:1983), rugby balls (IS 3985:1983) and footballs (IS 4207:1967), as of November 2026 (BIS standards list).

  • Cricket-ball covers are normally alum-tanned bovine leather (CFSD materials report).

  • Finished bovine leather under HSN 4107 attracts 5% GST under Notification 9/2025-Central Tax (Rate), as of November 2026 (HSN 4107 rate entry).

  • GST on most sports goods fell from 12% to 5% on 22 September 2025 (PIB GST reform note).

  • Published thickness guidance for boxing-glove leather differs between sources, so fix the figure in millimetres on your own purchase order.

Which leather hides suit which sports goods?

Match the tannage and animal to the product first, then the grade and thickness. The table below sets out the usual leather, the BIS reference where one exists, and whether the leather is in Sanwas International’s listed range.

Sports product

Leather usually specified

BIS reference (as of Nov 2026)

In Sanwas’s listed range?

Cricket balls

Alum-tanned bovine leather

Cricket-ball leather spec, referenced by IS 10800:1983

No – specialist alum tannage

Boxing and MMA gloves

Full-grain cowhide, buffalo or goatskin

IS 5597:1970

Yes – cow, buffalo or goat, full-grain

Hand-stitched leather footballs

Full chrome-tanned leather

IS 4207:1967

Confirm tannage at enquiry

Rugby balls

Chrome, semi-chrome or vegetable-tanned leather

IS 3985:1983

Vegetable-tanned is listed; confirm others

Hockey balls

Leather cover to the BIS leather spec

IS 5609:1983

Confirm at enquiry

Kit bags, straps and belts

Full-grain or vegetable-tanned cow or buffalo

No product-specific leather IS; test to ISO methods

Yes – full-grain or vegetable-tanned

The BIS numbers come from the BIS list of sports and speciality leather standards, and the BIS record for cricket-ball leather shows it is referenced by IS 10800:1983. A regulation-size cricket ball weighs between 155.9 g and 163 g, according to Leatherbiz.

Why do sports goods makers in Jalandhar buy leather locally?

Jalandhar’s sports goods cluster grew up beside one of India’s leather hubs, so leather and sports manufacturing share the same city.

Punjab makes nearly 65% of India’s sports goods and about 70% of its sports goods exports, and Jalandhar has more than 1,000 sports goods units, according to a March 2026 report on SSMB.

About 60% of the sports goods made in Jalandhar are inflatable balls, according to RGICS.

The city’s Leather Complex covers 222.30 acres with 440 units, according to the MSME-DI Jalandhar district profile. Sanwas International operates from 308 Leather Complex, so factories in the city can see sample hides before they approve bulk.

How do you specify thickness, grade and weight class for sports leather?

Write every property as a number or a named grade on the purchase order, then approve a physical sample against it. A checklist that works for most sports products:

  1. Thickness in millimetres with a tolerance, measured by ISO 2589.

  2. Animal and finish: cow, buffalo or goat; full-grain, nubuck, suede or vegetable-tanned.

  3. Selection grade (Cutting 1, Cutting 2, BB or Reject) – keep the better cutting grades for visible outer panels.

  4. Weight class (Super, Extra Heavy, Heavy or Medium), confirmed against a cut sample of the product.

  5. Colour, with colour fastness to perspiration (ISO 11641) for gloves and grips.

  6. Machine-cut or hand-cut, and any cutting pattern you need.

Sources disagree on boxing-glove leather thickness. Ringsport puts quality gloves at 0.5–1.0 mm, while an Alibaba seller guide recommends about 1.2 mm for professional training gloves. Agree your own figure with the glove maker and test the sample.

Which tests should you ask for before bulk?

Ask for the BIS test where a product-specific leather standard exists, plus standard ISO physical and fastness tests for everything else.

  • Thickness – ISO 2589.

  • Tensile strength and elongation – ISO 3376.

  • Tear strength – ISO 3377-1 or ISO 3377-2.

  • Flex resistance – ISO 5402-1.

  • Colour fastness to rubbing – ISO 11640.

  • Colour fastness to perspiration – ISO 11641, for gloves and grips.

These method numbers are listed by Eurofins and CTC. For how to run them on crust before finishing, see our guide to testing crust leather to ISO standards.

What GST applies when you buy hides for sports goods?

Finished leather hides are taxed at 5% GST, and most finished sports goods are also at 5%.

HSN 4107 finished bovine leather is named at 5% in Notification 9/2025-Central Tax (Rate), as of November 2026 (HSN 4107 entry).

Sports goods under heading 9506, other than general exercise equipment, moved from 12% to 5% from 22 September 2025 (Tax Garden summary).

Leather sports gloves and sports bags can fall under Chapter 42 rather than 9506, so confirm each finished product’s HSN with your CA. For buying hides inside India, see our leather hides supplier guide for Indian buyers.

How Sanwas International works with sports goods makers in India

Our leather hides range covers cow, buffalo and goat hides in full-grain, nubuck, suede and vegetable-tanned finishes. Hides are graded Cutting 1, Cutting 2, BB and Reject, in Super, Extra Heavy, Heavy and Medium weight classes. We machine-cut or hand-cut to your specification, offer custom colours, and run AQL inspection on LWG-certified supply.

That range suits boxing and MMA gloves, kit bags, straps and belts. Cricket-ball leather is a specialist alum tannage that is not in our listed range. If you also make belts or bags, our guide to hides for belts and bags covers those specs. To check fit for your product, request a quote for sports goods leather with your specification.

Frequently Asked Questions

What leather is used for cricket balls made in India?

Cricket-ball covers are normally made from alum-tanned bovine leather, stitched over a cork and string core. BIS keeps a separate specification for cricket-ball leather, referenced by IS 10800:1983 for cricket balls. Alum tannage is a specialist process, so buy it from a tanner that makes it and test it against that BIS specification.

Most leather boxing gloves use full-grain cowhide, buffalo or goatskin, and BIS covers boxing-glove leather in IS 5597:1970. Published thickness guidance ranges from about 0.5–1.0 mm to around 1.2 mm, so state your own figure in millimetres with a tolerance. Approve a sample hide before bulk so the shell, colour and feel are fixed in writing.

Yes. IS 4207:1967 covers leather for footballs made by full chrome tannage. IS 3985:1983 covers rugby-ball leather and allows chrome, semi-chrome and vegetable-tanned leather. Quote the standard number on your purchase order so the supplier tests against it.

Finished bovine leather under HSN 4107 attracts 5% GST under Notification 9/2025-Central Tax (Rate). Because the supply crosses from Punjab to Uttar Pradesh, the supplier charges it as 5% IGST on the invoice. Confirm the HSN code for your exact leather with your CA before the first order.

Yes. Sanwas International supplies sample hides for approval before bulk. Share the product, animal, finish, thickness, selection grade, colour and quantity so the sample matches what you will order. The approved sample then becomes the reference for AQL inspection of the bulk shipment.

Buying Leather Hides for Sports Goods? Request a Quote

Tell us the sports product, the leather type and finish, the quantity per colour and grade, the delivery city in India or destination country with your preferred Incoterm, and your target date. Sanwas International supplies sports goods makers across India and exports worldwide, and we can send sample hides before bulk.

Include these details in your enquiry:

  • Product category and style (for example boxing gloves, kit bags or straps)

  • Leather type, finish and colour

  • Target quantity per colour and grade

  • Delivery city in India or destination country/port, plus preferred Incoterm

  • Target delivery date and whether you need sample hides before bulk

Contact Sanwas International

Address: 308 Leather Complex, Kapurthala Road, Jalandhar, Punjab 144002, India

Comments


bottom of page