How to Import Leather Hides from India to Japan: Tariff Quotas, CEPA Duty and Consumption Tax (2026)
To import leather hides from India to Japan, chrome-tanned wet blue and crust enter duty-free, while most finished cow, buffalo and goat leather sits in Japan's tariff-quota system at 12–30%, unless the importer claims the India–Japan CEPA rate, which is Free with a certificate of origin. Japan then charges 10% consumption tax at import.
Updated November 2026. Rates in this guide come from Japan Customs' tariff schedule as of 31 October 2026. They are indicative, so agree the 9-digit Japanese statistical code with your customs broker before you price a shipment.
Key Takeaways
Chrome-tanned cow and buffalo wet blue and crust (heading 4104), when not further prepared, are Free for every origin in Japan's tariff schedule (as of October 2026).
Non-chrome and dyed bovine crust, bovine finished leather (4107) and dyed goat leather are quota products: 12–16% within the quota and a 30% WTO rate outside it.
On those quota lines, the India EPA column reads Free, per the Japan Tariff Association listing for statistical code 4107.99-222 (as of November 2026).
The EPA rate needs an India–Japan CEPA certificate of origin, issued in India by the Export Inspection Council (DGFT public notice).
Japan's 10% import consumption tax is charged on the CIF value plus any duty, per DHL's Japan import guide.
What import duty does Japan charge on leather hides from India?
It depends on the tannage, whether the leather is dyed, and whether you claim the CEPA rate. Chrome-tanned wet blue and plain chrome crust are Free; dyed crust, non-chrome tannages and finished leather fall under tariff quotas unless Indian origin is proven.
The table summarises the Chapter 41 lines most Indian shipments use, as listed in Japan Customs' schedule as of 31 October 2026. The India EPA rate applies only with a valid certificate of origin.
Leather from India | Japan heading | Rate without EPA | India EPA rate |
|---|---|---|---|
Cow or buffalo wet blue or crust, chrome-tanned, not further prepared | 4104 | Free | Free |
Cow or buffalo wet blue or crust, other tannages (for example vegetable-tanned) | 4104 | 12% in quota; 30% outside | Free |
Cow or buffalo crust, dyed or coloured | 4104.41 / 4104.49 | 13.3–16% in quota; 30% outside | Free |
Cow or buffalo finished leather, dyed, coloured, stamped or embossed | 4107 | 13.3–16% in quota; 30% outside | Free |
Cow or buffalo finished leather, other | 4107 | 12% in quota; 30% outside | Free |
Goat wet blue; goat crust or finished leather not dyed | 4106.21 / 4106.22 / 4113.10 | Free | Free |
Goat crust or finished leather, dyed, coloured, stamped or embossed | 4106.22 / 4113.10 | 16% in quota; 30% outside | Free |
Reputable sources have disagreed on this point. Leather International reported in 2011 that Japan offered no CEPA concessions on leather, but Japan's current schedule lists Free in the India column for these lines. The agreement has been in force since 1 August 2011, according to the Council for Leather Exports. Rely on the current schedule and your broker, not on older reports.
How does Japan's leather tariff quota work for Indian suppliers?
Japan limits how much bovine, sheep and goat leather enters each year at its lower in-quota rates. Imports outside the quota pay the 30% WTO rate, and the statutory general rate on these lines is 60%.
The Pooled Quota (First Category) is set on the basis of 214,000 m² a year at 12%, covering undyed, non-chrome bovine hides, crust and finished leather (Japan Customs, as of October 2026).
The Pooled Quota (Second Category) is set on the basis of 1,466,000 m² a year for dyed or coloured bovine crust and finished leather, at 13.3% or 16% depending on the sub-line.
Buffalo leather, roller leather and whole bovine skins of up to 2.6 m² sit in the 16% sub-line rather than the 13.3% one, which matters for Indian buffalo leather.
A separate Pooled Quota of 1,070,000 m² covers dyed sheep and goat crust and leather at 16%.
For Indian-origin leather, the paperwork matters more than the quota. The India EPA rate on the out-of-quota lines is Free, which is lower than every in-quota rate. Ask your broker to declare under the EPA rate and to confirm the line before the goods sail.
What does a shipment cost with and without a CEPA certificate of origin?
The certificate can remove the largest cost item. The worked example uses illustrative figures for one consignment of dyed bovine finished leather declared outside the quota; they are not Sanwas prices.
Cost item | With CEPA certificate of origin | Without it (30% WTO rate) |
|---|---|---|
CIF value | ¥5,000,000 | ¥5,000,000 |
Customs duty | ¥0 | ¥1,500,000 |
Consumption tax (10% of CIF + duty) | ¥500,000 | ¥650,000 |
Total duty and tax at import | ¥500,000 | ¥2,150,000 |
Japan's 10% consumption tax combines 7.8% national and 2.2% local tax, as Zonos explains. Registered businesses can typically credit import consumption tax as input tax, according to DutyDecoder, so confirm your position with a Japanese tax adviser.
What documents and checks do leather hides need to enter Japan?
Plan the origin certificate and the tariff line before booking freight. The checklist below covers what Japanese importers usually ask an Indian exporter to prepare.
An India–Japan CEPA certificate of origin from the Export Inspection Council, which DGFT authorised in August 2011 to issue these certificates.
A commercial invoice and packing list stating the animal, the tannage (chrome or other), whether the leather is dyed, and the area in square metres and weight in kilograms, the units used in Japan's schedule.
A bill of lading or air waybill matching the invoice and certificate details.
An agreed 9-digit Japanese statistical code, because chrome versus vegetable tannage and dyed versus undyed leather change the line.
Animal quarantine clearance checked in advance for anything less processed than wet blue.
Japan Customs' schedule flags raw bovine hide lines (4101) with an animal-quarantine law reference, while the tanned, crust and finished lines (4104 and 4107) carry no such reference. The Animal Quarantine Service clarified from 1 July 2026 that processed products made from designated quarantine items are themselves designated unless its exclusion criteria apply. Confirm the status of salted or pickled material with the Service before ordering it.
Which test reports should Japanese buyers request from an Indian supplier?
Start with azo dyes if the leather will become a regulated household product. Since April 2016, Japan has limited 24 specified aromatic amines from azo compounds to 30 μg per gram, as the City of Yokohama health institute notes.
The rule covers leather and fur products such as underwear, gloves, intermediate wear, outerwear, headwear and floor mats, per the MHLW summary of criteria and the NIHS English summary. For physical and colour-fastness tests, see our guide to crust leather testing and ISO standards. If you also source finished garments, read how to import leather jackets from India to Japan.
How Sanwas International works with Japanese leather buyers
Specification | What Sanwas International supplies |
|---|---|
Animals | Cow, buffalo and goat hides |
Finishes | Full-grain, nubuck, suede and vegetable-tanned |
Selection grades | Cutting 1, Cutting 2, BB and Reject |
Weight classes | Super, Extra Heavy, Heavy and Medium |
Cutting | Machine-cut and hand-cut to buyer specification |
Colour | Custom colours |
Assurance | LWG-certified supply and AQL inspection |
Reach | Buyers across India; exports to Asia, Europe, North America, Africa and Australia |
Tell us early if you need vegetable-tanned or dyed leather for Japan, because those fall on quota lines where the CEPA certificate decides the duty. Review our leather hides supply page and certifications, compare the EU route in our guide to importing leather hides from India to Germany, or request a quote for leather hides shipped to Japan.
Frequently Asked Questions
What is Japan's import duty on cow or buffalo finished leather from India in 2026?
Bovine and buffalo finished leather under heading 4107 is a tariff-quota product in Japan: 12–16% within the quota and a 30% WTO rate outside it, per the schedule as of 31 October 2026. The India EPA column lists Free for these lines when a valid CEPA certificate of origin is presented. Confirm the 9-digit statistical code with your broker before pricing.
Can a Japanese tannery import chrome-tanned wet blue from India duty-free?
Yes. Chrome-tanned bovine and buffalo wet blue under 4104.11 and 4104.19 is Free for every origin in Japan's schedule, with or without a certificate of origin. The 10% import consumption tax still applies on the CIF value.
Do I need a certificate of origin to bring Indian finished leather into Japan duty-free?
Yes. The Free rate is an EPA rate, so the shipment needs an India–Japan CEPA certificate of origin issued in India by the Export Inspection Council. Without it, many finished leather lines fall to the 30% WTO rate once outside the quota.
Do Japanese azo dye limits apply to leather goods made from Indian hides?
They apply to listed leather and fur products, including gloves, outerwear, underwear, headwear and floor mats. Each of 24 specified aromatic amines must stay at or below 30 μg per gram. Ask your supplier for azo test reports on the leather lots you will use for those products.
Does Sanwas International supply buffalo and goat leather for Japanese buyers, and can I see sample hides first?
Yes. Sanwas International supplies cow, buffalo and goat hides in full-grain, nubuck, suede and vegetable-tanned finishes, graded Cutting 1, Cutting 2, BB and Reject. Japanese buyers can approve sample hides before bulk, and bulk lots are AQL-inspected before export shipping.
Importing Leather Hides to Japan? Request a Quote
Send Sanwas International your hides or finished leather requirement, including the animal, tannage, finish, quantity, destination port in Japan, preferred Incoterm and target date. We supply buyers across India and export worldwide, and we can send sample hides before bulk so grade, colour and weight class are agreed against a physical reference.
Include these details in your enquiry:
Product category and style: wet blue, crust or finished leather, and the end product it is for
Leather type, finish and colour: cow, buffalo or goat; chrome or vegetable-tanned; full-grain, nubuck or suede
Target quantity per colour and grade (Cutting 1, Cutting 2 or BB) and weight class
Destination port in Japan or Indian city, plus preferred Incoterm
Target delivery date and whether you need sample hides before bulk
Contact Sanwas International
Mob: +91 8728858686
Address: 308 Leather Complex, Kapurthala Road, Jalandhar, Punjab 144002, India




Comments