top of page

How to Import Finished Leather from India to Ethiopia: Duty, Taxes and the Djibouti Route (2026)

4 days ago
6 min read

To import finished leather from India to Ethiopia, get the HS code right first. Ethiopia's customs tariff lists bovine crust and finished leather (HS 4104 and 4107) as duty-free, while finished sheep leather pays 20% and finished goat leather 30%. Import VAT, a 10% surtax and withholding tax still apply, and most containers reach Addis Ababa through Djibouti.

Key Takeaways

  • Updated November 2026: the Ethiopian Customs Commission tariff book shows cow and buffalo wet blue, crust and finished leather (HS 4104, 4107) as Free; confirm the live rate on customs.gov.et before you ship.

  • Finished sheep leather (HS 4112) is listed at 20%, and finished goat leather, patent and metallised leather (HS 4113.10, 4114) at 30%.

  • Import VAT is 15%, surtax 10% and withholding tax 3% of CIF, according to the US Commercial Service guide to Ethiopia.

  • India has no trade agreement with Ethiopia, so Indian leather pays the basic (First Schedule) rate; COMESA preferential rates apply only to COMESA-origin goods.

  • The Addis Ababa–Djibouti railway cut freight time between Djibouti and the Modjo dry port from 84 hours to 10–15 hours (Logistics Cluster).

What import duty does Ethiopia charge on finished leather from India?

For cow and buffalo leather, the listed customs duty is zero. The rate depends on the animal and the stage of processing, so the 8-digit tariff item on your invoice decides the bill.

The figures below come from the Ethiopian Customs Commission tariff (HS 2017 edition, published 2019), the most recent full schedule we could check as of November 2026. Ethiopia is not a WTO member and has no bound tariff rates (trade.gov), so rates can change by directive; ask your clearing agent to confirm before you open a letter of credit.

HS / tariff item

Product

Ethiopian duty rate

4104.11 / 4104.19

Bovine wet blue (wet state)

Free

4104.41 / 4104.49

Bovine crust (dry state)

Free

4107.11 to 4107.99

Finished cow / buffalo leather, full grain and splits

Free

4106.21 / 4106.22

Goat wet blue and crust

Free

4112.0000

Finished sheep or lamb leather

20%

4113.1000

Finished goat or kid leather

30%

4114.10 / 4114.20

Chamois, patent and metallised leather

30%

None of these Chapter 41 lines carries the excise marker used in the tariff book, so excise tax should not apply. The tariff book also notes that where its rates conflict with those issued by the Ministry of Finance, the Ministry's rates prevail.

Which other taxes does an Ethiopian importer pay at the border?

Even at 0% duty, expect roughly 30% of CIF value in border taxes on bovine leather, most of which a VAT-registered factory can recover or offset. The taxes compound in sequence.

VAT is 15% of CIF plus duty and excise, surtax is 10% of CIF plus duty, excise and VAT, and withholding tax is 3% of CIF (trade.gov; PwC). Trade.gov lists raw materials among the surtax exceptions, so a manufacturer importing leather as an input should ask whether its import qualifies. A social welfare levy on imported goods was added in 2022 (EY); confirm its current rate with your agent.

Charge (per 100 CIF)

Cow / buffalo finished leather (HS 4107)

Goat finished leather (HS 4113.10)

Customs duty

0.00

30.00

VAT 15%

15.00

19.50

Surtax 10% (if no exemption)

11.50

17.95

Withholding tax 3%

3.00

3.00

Total border taxes

29.50

70.45

The worked example excludes the social welfare levy, port, rail and clearing charges. JETRO notes that import VAT can be credited against output VAT and withholding tax works as an advance on income tax. The gap of about 41 per 100 CIF is why Ethiopian shoe factories often specify cow or buffalo leather wherever the product allows.

Why are Ethiopian tanneries and shoe factories sourcing leather from India in 2026?

Domestic hide supply has tightened, and some factories now import inputs to keep lines running. Capital reported in October 2026 that Ethiopian tanneries are bringing in inputs from India and Bangladesh, as well as Chile, to avoid idle machinery.

The Ethiopian Leather Industries Association told the paper that the change allowing raw leather exports after paying a 150% tax has diverted hides abroad and pushed up input prices. For a factory, a documented import supply of a consistent grade can steady production planning while local supply recovers.

How does leather from India reach Addis Ababa?

Most cargo goes by sea to Djibouti, then by rail or truck to the Modjo dry port near Addis Ababa. Ethiopia is landlocked, so plan the inland leg as carefully as the ocean leg.

  • The electrified Addis Ababa–Djibouti line runs 756 km and is the main import channel for Ethiopia (Logistics Cluster).

  • Modjo dry port, about 73 km from the capital and linked to the railway (ESLSE), handles more than 70% of the country's imports (Capital).

  • Agree early whether you are buying CIF Djibouti and arranging the inland leg yourself, or using a multimodal through bill of lading to Modjo, because the choice changes who handles the Djibouti hand-over.

  • Pack finished leather rolled or flat with moisture barriers and desiccants; a long port dwell in a hot climate raises the risk of mould on hides.

Buyers comparing East African routes can read how Kenyan factories import finished leather from India through Mombasa under the EAC tariff, which works very differently from Ethiopia's national schedule.

What should an Ethiopian factory specify when ordering leather from India?

Write the specification so the invoice, packing list and HS code all match what customs will see. A mismatch between "finished goat leather" and "bovine leather" can move a line from Free to 30%.

  • Animal and HS code: cow, buffalo or goat, with the 4104, 4106, 4107 or 4113 line stated on the proforma.

  • Finish: full-grain, nubuck, suede or vegetable-tanned, plus colour references or physical swatches.

  • Selection grade: Cutting 1, Cutting 2, BB or Reject, with the share of each grade if you accept a mix.

  • Weight class and thickness: Super, Extra Heavy, Heavy or Medium, with a thickness range in mm per article.

  • Cutting: machine-cut or hand-cut to your pattern, if you want panels rather than full hides.

  • Documents: commercial invoice, packing list, certificate of origin and the test reports your buyers need.

Overseas buyers should also check India's side of the paperwork; our guide to India's export duty on leather hides explains how the stage of processing affects export charges.

How Sanwas International works with Ethiopian buyers

For Ethiopian tanneries, shoe factories and leather-goods makers, Sanwas supplies cow, buffalo and goat hides in full-grain, nubuck, suede and vegetable-tanned finishes, graded Cutting 1, Cutting 2, BB and Reject across Super, Extra Heavy, Heavy and Medium weight classes. Hides can be machine-cut or hand-cut to your specification in custom colours, checked by AQL inspection and shipped for export. See the full range on our leather hides supply page and our certifications.

Share your article, HS line and target quantity and request a hides quote from Sanwas International.

Frequently Asked Questions

What import duty does Ethiopia charge on finished cow leather from India?

Ethiopia's customs tariff lists finished bovine leather of HS 4107 as Free, and bovine wet blue and crust of HS 4104 are also Free. Import VAT of 15%, surtax of 10% and withholding tax of 3% still apply at the border. Check the live rate with the Ethiopian Customs Commission before shipping, because rates can be changed by directive.

I run a shoe factory in Addis Ababa. Is goat leather from India more expensive to import than cow leather?

Yes, at the border it is. Finished goat leather (HS 4113.10) is listed at 30% duty and finished sheep leather at 20%, while finished cow and buffalo leather is Free. Because VAT and surtax are charged on top of duty, the gap grows to roughly 41 per 100 of CIF value.

Does India have a trade agreement that cuts Ethiopian duty on leather?

No. India has no bilateral trade agreement with Ethiopia, so Indian-origin leather pays the basic First Schedule rate. The COMESA tariff in Ethiopia's tariff book applies only to goods produced in and imported from COMESA member countries.

How long does leather from India take to reach the Modjo dry port?

Ocean transit to Djibouti depends on the carrier and transhipment, so ask your forwarder for a current schedule. From Djibouti, the electrified railway has cut the freight journey to Modjo to about 10 to 15 hours, against roughly 84 hours by the old route. Allow extra time for Djibouti port handling and customs clearance at Modjo.

Can Sanwas International send sample hides to Ethiopia before a bulk order?

Yes, Sanwas can send sample hides for approval before bulk so your team can check grade, thickness, colour and finish. Share the article, animal, finish and target quantity with your enquiry. Bulk production then follows the approved sample.

Importing Finished Leather to Ethiopia? Request a Quote

Tell us the leather you need, the animal, grade and finish, your quantity per colour, the destination (Djibouti, Modjo or your factory) with your preferred Incoterm, and your target date. Sanwas International supplies buyers across India and exports to Asia, Europe, North America, Africa and Australia, and can arrange sample hides before bulk.

Include these details in your enquiry:

  • Product category and style (for example finished leather for shoe uppers, linings or leather goods)

  • Leather type, finish and colour (cow, buffalo or goat; full-grain, nubuck, suede or vegetable-tanned)

  • Target quantity per colour and grade

  • Destination country and port (Djibouti or Modjo) plus preferred Incoterm

  • Target delivery date and whether you need sample hides before bulk

Contact Sanwas International

Address: 308 Leather Complex, Kapurthala Road, Jalandhar, Punjab 144002, India

Comments


bottom of page