top of page

What Leather Should UK Hotels Specify for Upholstery in 2026?

Oct 13
3 min read

Updated: Nov 10

For UK hotel upholstery in 2026, specify a protected (pigmented) or semi-aniline cowhide in warm tones such as cognac or caramel, bought from one dye lot, and make sure the finished seating meets BS 7176. SATRA advises that the medium hazard category is appropriate for upholstered hotel furniture.


Key Takeaways

  • For UK hotel upholstery in 2026, specify protected (pigmented) or semi-aniline cowhide in warm tones such as cognac, caramel or deep brown.

  • Pigmented finishes suit lobbies, restaurants and bars; semi-aniline is better kept for suites and lower-traffic areas.

  • Upholstered hotel seating is normally specified to BS 7176, which tests the finished cover-and-filling combination with match, cigarette and crib 5 ignition sources.

  • SATRA advises that the medium hazard category is appropriate for upholstered hotel furniture.

  • Buy all hides for one project from a single dye lot, checked against an approved master swatch.


The Detailed Answer: Hotel Upholstery Leather for UK Projects

Hotel seating takes far heavier daily use than residential furniture, so the brief should start with durability and cleanability, then colour, then compliance. A pigmented finish carries a protective surface coat that resists spills, body oils and abrasion, which is why it suits lobbies, restaurants and bars. Semi-aniline feels softer and more natural but marks more easily, so it is better kept for suites and lower-traffic areas.


On colour, trade forecasts point to warm, grounded shades. UK supplier Yarwood Leather's 2026 furniture trends (published September 2025) names cognac, caramel and deep brown as leading tones, with oversized and curved sofas for hotel lounges.


In-process quality check of finished hotel upholstery leather for UK hotels at Sanwas International, Jalandhar

Spec item

What to specify for a UK hotel refit

Hide and tannage

Full-grain or corrected-grain cowhide, chrome-tanned for softness and colour stability

Finish

Pigmented (protected) for lobbies, restaurants and bars; semi-aniline only for lower-traffic suites

Colour

Warm 2026 tones such as cognac, caramel and deep brown, matched to an approved master swatch

Fire safety

Finished seating (leather, interliner and foam together) tested to BS 7176 at the hazard level in the fire risk assessment

Consistency

All hides for one project from a single dye lot, checked against the approved sample

Sourcing

Leather from an LWG-certified tannery, with test reports supplied on request


For fire safety, upholstered furniture supplied to UK hotels is normally specified to BS 7176, which applies match, cigarette and crib 5 ignition tests to the finished cover-and-filling combination. SATRA's guidance on contract furniture states that the medium hazard category is appropriate for upholstered hotel furniture. Confirm the required level with the hotel's fire risk assessor before you sample.


For a fuller spec checklist covering finishes, hide types and testing, see our upholstery leather spec guide for furniture makers.


How Sanwas International Supplies Hotel and Contract Upholstery Leather


Sanwas International is an OEM and private label leather manufacturer and exporter in Jalandhar, Punjab, supplying finished furniture leather and leather hides to furniture makers, contract upholsterers and importers in the UK, Europe and beyond. We are LWG certified, offer first samples and MOQs under 500 units per style, and run AQL inspection before dispatch. Explore our leather materials and manufacturing expertise or contact Sanwas International to discuss your project.


Frequently Asked Questions

Who arranges BS 7176 testing: the leather supplier or the furniture maker?

Usually the furniture maker or upholsterer, because BS 7176 tests the finished combination of cover, interliner and filling rather than the leather alone. The leather supplier should provide samples from the production batch and any material test reports the testing house needs.

Can a hotel group order upholstery leather in its own brand colour?

Yes. Most finished-leather manufacturers can develop a custom shade against a physical swatch or colour reference. Approve a lab dip or sample hide under the hotel's own lighting before bulk dyeing starts.

How much spare leather should a hotel refit order?

Agree a contingency with your supplier before production so spare hides come from the same dye lot as the main order. Keeping matched stock in reserve makes future repairs and recovering far easier than trying to match a new batch years later.


Get a Quote for Your Hotel Upholstery Leather

Furniture makers, contract upholsterers, hotel groups and importers in the UK: share the leather type and finish, colour reference, quantity in square feet or number of pieces, destination city, preferred Incoterm and target delivery date.

Include these details in your enquiry:

  • Product category and style (footwear, jacket, upholstery leather, hides or crust)

  • Leather type, finish and colour

  • Target quantity per style and colour

  • Delivery city in India or destination country, plus preferred Incoterm

  • Target delivery date and whether you need a sample before bulk

Contact Sanwas International

Address: 308 Leather Complex, Kapurthala Road, Jalandhar, Punjab 144002, India

Comments


bottom of page