top of page

How Should Indian Hotel Projects Buy Upholstery Leather in Bulk?

Nov 4
4 min read

Updated: Nov 10

Indian hotel projects buying hotel upholstery leather in bulk should order direct from a manufacturer against an approved sample: fix finish, thickness, colour and rub-fastness grade in writing, run the full room count from one production lot, and insist on a GST invoice, since finished leather has carried 5% GST from 22 September 2025.

Key Takeaways

  • Buy direct from a manufacturer against an approved sample, with finish, thickness, colour and rub-fastness grade fixed in writing.

  • Run the full room count from one production lot to avoid shade differences between floors.

  • Use pigmented or semi-aniline leather for high-traffic hotel seating; keep aniline for low-use feature pieces.

  • Specify colour fastness to rubbing to ISO 11640 (dry and wet), graded 1 to 5.

  • Finished leather carries 5% GST in India since 22 September 2025 (Notification No. 9/2025-Central Tax (Rate)).


Hotel Upholstery Leather in India: The Detailed Answer


Demand is real. The Hotelivate-Savills 2026 Indian Hospitality Trends & Opportunities Report, reported in October 2026, counts a proposed branded pipeline of 161,074 rooms, 116,645 of them in the active pipeline, with the fastest growth in cities such as Udaipur, Dehradun, Lucknow and Amritsar. Every opening needs lobby seating, restaurant chairs, bar stools and headboards, and the leather is often bought by the owner, FF&E consultant or fit-out contractor rather than the furniture maker alone.


Hospitality leather wears harder than residential leather, so write these points into the purchase order:


Specification

What to agree with the supplier

Finish

Pigmented or semi-aniline for high-traffic seating; keep aniline for low-use feature pieces

Rub fastness

Colour fastness to rubbing tested to ISO 11640 (dry and wet), graded 1 to 5 on grey scales; set the minimum grade with your FF&E consultant

Thickness

A thickness range for each item (seat, back, headboard), checked on delivery

Colour and lot

One approved master swatch, with the full project quantity from one production lot where possible

Fire performance

Follow the hotel brand standard or the project fire consultant, and ask for test reports before bulk

GST and billing

Finished bovine leather under HSN 4107 (sheep 4112, goat 4113) at 5% GST from 22 September 2025, with an e-way bill for road dispatch


Leather hides hanging for selection at Sanwas International in Jalandhar for bulk hotel upholstery leather orders in India

The GST cut from 12% to 5% on tanned and finished leather is confirmed by the Council for Leather Exports (Notification No. 9/2025-Central Tax (Rate)). If lobby and guest rooms open months apart, reserve the colour recipe and approve a strike-off before a top-up lot rather than mixing lots on one floor. Ask your upholsterer for the cutting yield per piece before fixing square footage, because wastage varies with design. For a fuller specification guide, read our upholstery leather supplier guide for furniture makers.


Sanwas International supplies furniture leather and leather hides from Jalandhar, Punjab, to furniture manufacturers, fit-out contractors and hospitality buyers across India. We are LWG certified, send sample hides for approval, run AQL inspection before dispatch and work to lead times from 72-hour sampling to 30-day bulk. See the grades on our leather hides supply page, then share your hotel project specification with our team.


Frequently Asked Questions

Should a hotel buy leather directly or let the furniture maker source it?

Either works, but buying direct lets the owner or FF&E consultant fix the specification, approve the master swatch and keep one lot across several furniture vendors. If you buy direct, agree in advance which furniture maker checks the hides on arrival and who carries the cutting wastage.

Yes. One purchase order can carry several colours, finishes and thicknesses, with quantities agreed per colour at quotation. Keep high-traffic dining chairs and bar stools in a pigmented finish, even if lobby feature pieces use a softer semi-aniline leather.

Work back from the date your furniture maker starts cutting. Allow time for sampling and swatch approval, bulk production of up to 30 days at Sanwas International, and road transit, then add a buffer in case a colour needs re-approval before the furniture schedule starts.

Tanned and finished leather has carried 5% GST since 22 September 2025, down from 12%, under Notification No. 9/2025-Central Tax (Rate). Hotel buyers should insist on a proper GST invoice from the leather supplier for every bulk lot.

Ask for colour fastness to rubbing tested to ISO 11640, both dry and wet, graded 1 to 5 on grey scales. Set the minimum acceptable grade with your FF&E consultant and write it into the purchase order alongside finish, thickness and colour.

Get a Quote for Your Hotel Upholstery Leather


Hotel owners, FF&E consultants, fit-out contractors and furniture manufacturers in India can share the furniture items, leather type and finish, colours, quantity in square feet, delivery city and target date. You can request sample hides for approval before bulk.


Include these details in your enquiry:

  • Product category: upholstery leather or hides, and the furniture items (seating, bar stools, headboards)

  • Leather type, finish and colour

  • Target quantity in square feet per colour

  • Delivery city in India (or destination country), plus preferred Incoterm for export

  • Target delivery date and whether you need sample hides before bulk

Contact Sanwas International

Address: 308 Leather Complex, Kapurthala Road, Jalandhar, Punjab 144002, India

Comments


bottom of page