Why Are Overseas Buyers Switching to Crust Leather from India?
Overseas tanneries, finishers and footwear makers are switching to crust leather from India because they can finish it locally to their own colours and surfaces, and because India made crust cheaper and easier to export: export duty fell from 20% to nil on 2 February 2025, and mandatory CLRI export testing was dropped in May 2025.
Key Takeaways
Updated November 2026: India's export duty on crust leather has been nil since 2 February 2025 (previously 20%).
Since the DGFT notification of May 2025, mandatory CLRI testing is no longer required to export crust, finished, wet blue or EI tanned leather.
The CLE said at IILF 2026 that global demand has shifted from finished leather towards crust.
Crust lets overseas finishers apply their own colours and surfaces close to their customers.
Specify tannage, animal, substance in mm, grade and minimum usable area on every crust enquiry.
Why Crust Leather from India Now Makes Sense
Crust is leather that has been tanned, retanned, dyed, fatliquored and dried but has not yet received its surface finish. Buying at this stage lets a finisher or factory abroad apply its own colours, coatings and effects, keep finishing close to its customers, and react faster when seasonal colours change. At a media conference during IILF 2026 in January, the Council for Leather Exports (CLE) said most global demand has moved from finished leather to crust, according to Leathernews.org.
Indian policy has moved the same way. The changes overseas buyers should know about, as of November 2026:
Change | What it means for importers |
Export duty on crust leather | Cut from 20% to nil from 2 February 2025 (Union Budget 2025-26). |
Port restrictions (DGFT, May 2025) | Finished, wet blue and EI tanned leather can now ship from any Indian port or ICD, not only notified ports. |
CLRI export testing (DGFT, May 2025) | Mandatory CLRI testing and certification for crust, finished, wet blue and EI tanned leather exports was dropped. |
Buyer demand (CLE, January 2026) | CLE reports that most overseas demand is now for crust rather than finished leather. |
You can check the duty change in the CLE's Union Budget 2025-26 highlights and the export-procedure change in the CLE notice on removal of port restrictions and testing requirements.

When you switch from finished leather to crust, put these on the enquiry:
Animal and tannage: chrome, vegetable or semi-vegetable, and cow, buffalo or goat.
Substance range in mm, selection grade and the minimum usable area per hide.
Colour or neutral shade, whether you need it dyed through, and the area measurement method.
Any chemical tests your market requires, and a small trial lot to check how the crust takes your finish.
Our guide to writing a crust leather purchase order covers each line in detail, and our leather materials and tannery page shows the hides and finishes we work with.
We supply cow, buffalo and goat hides in full-grain, nubuck, suede and vegetable-tanned finishes, from LWG-certified supply, with AQL inspection and export shipping to Asia, Europe, North America, Africa and Australia. We can send sample hides before bulk so you can test them on your own finishing line. Request a quote from Sanwas International.
Frequently Asked Questions
Do crust leather exports from India still need CLRI testing?
No. Since the DGFT notification of May 2025, mandatory testing and certification by the Central Leather Research Institute is no longer required to export crust, finished, wet blue or EI tanned leather. You can still ask your supplier for independent lab reports, such as a chromium VI test, as part of your own specification.
Which buyers should still order finished leather instead of crust?
Finished leather usually suits buyers without a finishing line of their own, such as cut-and-sew footwear, bag and garment units, or brands that want a ready-to-cut surface approved at the supplier. Crust makes most sense for tanneries, finishers and integrated factories that want control over colour and surface.
Is crust leather from India only chrome-tanned?
No. Crust is traded as chrome-tanned, vegetable-tanned and semi-vegetable (combination) tanned, and each takes finishes differently. State the tannage in your enquiry, and for chrome crust going to the EU or UK, ask for a chromium VI test report.
What did India change in export duty on crust leather?
Export duty on crust leather was cut from 20% to nil from 2 February 2025 under the Union Budget 2025-26. That removed a cost that had made Indian crust less competitive with finished leather. Confirm the current rate with your supplier when you place an order.
What should an overseas tannery put on a crust leather enquiry to a supplier in India?
State the animal and tannage (chrome, vegetable or semi-vegetable; cow, buffalo or goat), the substance range in mm, the selection grade and the minimum usable area per hide. Add the colour or neutral shade, whether it must be dyed through, the area measurement method, and any chemical tests your market requires. A small trial lot shows how the crust takes your finish before bulk.
Ready to Source Crust Leather from India?
Overseas tanneries, finishers, footwear factories and importers can share the leather type and tannage, substance, colour, quantity in square feet, destination country, preferred Incoterm and target date. Sanwas International supplies buyers across India and exports worldwide, and we can send sample hides before bulk so you can test the crust on your own finishing line.
Include these details in your enquiry:
Product category and style (crust, finished leather or hides, and the end product)
Leather type, tannage, finish and colour
Target quantity per colour and grade
Destination country/port or Indian city, plus preferred Incoterm
Target delivery date and whether you need sample hides before bulk
Contact Sanwas International
Mob: +91 8728858686
Address: 308 Leather Complex, Kapurthala Road, Jalandhar, Punjab 144002, India




Comments